By SMT • • • • 0 Comments

A big benefit to you：Free to Apply Barcode Verifiers

As we all konw ，it’s very necessary to verify  material component in SMT industry.

But we found that  some companies  are always using the operators ，it’s easy to make mistakes and waste time very much，and another companies verify material component by systems ，also so expensive and complex.

So，today I recommend you a machine to verify the material component.This is an auto insertion machine for PCB assembly from Southern Machinery in China, very efficient and reliable but low cost.

How to verify  SMT material  component ？It’s only need three steps .

And if  you are very interested in our machine，we can provide a chance of a free trial to you.You only need to  write the application form completely  to our email：info@smthelp.net，as following：

We will make statistics，looking forward your inquirys.

We designed and manufactured auto insertion machine，SMT equipment, and providing spare parts support .
We provide totally solution for LED lighting SMT PCB assembly.
Worldwide Installation and on site support.
Factory (machine and lighting assembly) training.

By SMThelp Article 0 Comments

$4000.00 Upgrade Universal Radial Insertion machine to Quad Span electronics component PCB assembly

Large Triple Span Machines (5.0/7.5/10.0 mm Span) Insertion performance is maximized by considering the jaw tooling design when laying out the PC board hole patterns (the jaw clamps secure the component leads against the fixed surfaces of the jaw guide). For best results, the insertion hole spans in the PC board should be designed as follows: • For 5.0 mm Spans: – Round leads: One lead diameter + 4.50 mm (0.177 in.) = Recommended Lead Hole Span – Rectangular leads: One lead width + 4.50 mm (0.177 in.) = Recommended Lead Hole Span • For 7.5 mm Spans: – Round leads: One lead diameter + 7.04 mm (0.277 in.) = Recommended Lead Hole Span – Rectangular leads: One lead width + 7.04 mm (0.277 in.) = Recommended Lead Hole Span • For 10.0 mm Spans: – Round loudens lead diameter + 9.58 mm (0.377 in.) = Recommended Lead Hole Span – Rectangular leads: One lead width + 9.58 mm (0.377 in.) = Recommended Lead Hole Span

By Accessary • Auto insertion • LED Marketing • SMT • THT • • • • • • • • • • • • • 0 Comments

Why choose “One stop solution “?

Southern Machinery provide the whole line installation ,training and after sales services. Improve efficiency , reduce cost.

The wole SMT line process including: Printer, pick &place ,reflow oven, conveyor.
One stop improve the whole line pruduction capacity , with line balance.
Overall considering to improve product quality , not just by a single machine.
It is the best solution proved by most of our customers.

By Accessary • Article • SMT • • • • • 0 Comments

SMT components counting machine

Suitable for electronics production factory, SMT processing factory, SMD parts manufacturer, SMD parts supplier, and other industries related to electronic components.

1, high precision, count zero error;

2, SMD gm volume packaging components are applicable.

3, direction, all can count, repeat check function; Can be preset number.

4, the operation is simple, unique anti strip off design minimize the harm of strip.Patent design: tilting the operation panel of the users can see the screen at the same time of loading components, more accord with human body engineering.

By Auto insertion • SMT • THT • • • • • • • • • • • • • • • 0 Comments

Only you think, we can’t do without.

By Article • LED Marketing • SMT • • • • • • • • 0 Comments

ROI:<10 months/S-320-pick&place machine

— A Semi-auto LED assembly SMT line cost low but at the same time can
satisfy your requirements.
— Not only with imported important
parts lowering the cost of the whole
machine but also greatly prolong the
life of the machine
— Welcome to send us samples free
of charge proofing,
welcome to visit the factory.