By SMThelp Accessary • SMT • • • • • • • • • 0 Comments

Optimal SMT stencil cleaning performance to improve Electronic Product Quality

Advantages of (2)

Powerful Cleaning Capability

Two ultrasonic cleansing head panels clear each the back and front sides of the metallic stencil concurrently. Ultrasonic power is utilized on to the stencil offering superior cleansing functionality.

Ease of Operation

Just press the beginning button and the method of cleansing and drying might be accomplished. No operator dealing with is required.

Low-VOC Cleaning Agent

Low-VOC cleansing agent, VIGON SC200 can be utilized for SC-AH100F-LV. There is not any flash level, low evaporation and virtually no odor. A good working setting might be maintained.

Reduction of CO2 Emission

reduces power consumption because of the shortened tact time and accordingly reduces CO2 emissions.

Cleaning Evaluation

 

 

Advantages of (2)
Powerful cialis Cleaning Capability

Two ultrasonic cleansing head panels clear each the back and front sides of the metallic stencil concurrently. Ultrasonic power is utilized on to the stencil offering superior cleansing functionality.

Ease of Operation
Just press the beginning button and the method of cleansing and drying might be accomplished. No operator dealing with is required.

Low-VOC Cleaning Agent
Low-VOC cleansing agent, VIGON SC200 can be utilized for SC-AH100F-LV. There is not any flash level, low evaporation and virtually no odor. A good working setting might be maintained.

Reduction of CO2 Emission
reduces power consumption because of the shortened tact time and accordingly reduces CO2 emissions.

Cleaning Evaluation

By Auto insertion • THT • • • • • • • • 0 Comments

Odd-form component mounter

Odd-form component mounter
Improve product quality and increase production capacity solution.

odd-form solutions are designed for high volume and high mix production. Odd-form process automation is an efficient way to improve profitability significantly by increasing the throughput and assembly quality.
The benefits can be measured in assembly reliability, accuracy and flexibility, labor savings, assembly yield improvements, floor space savings and optimization of processes.

By Auto insertion • SMT • • • • • • • 0 Comments

Are you finding the automatic nozzles cleaner？We can provide！

nozzles cleaner

In the process of SMT, the suction nozzle is quite easily adhered with solder paste or dirt etc. If maintenance has not been done for a long time or the cleaning is not thorough enough while maintaining it, the paste and dirt will be hardened so as to increase the difficulty of cleaning, even it will result in blockage and scraps after long-time accumulation. It practically proves that the S-U24cleaning machine can effectively deal with inflexible solder paste and thoroughly clean the suction nozzle with complex structure.

 

Equipment size     L× W×H (mm) 505 ×570 ×500
Equipment weight quality 70KG
Cleaning liquor   Cleaning liquor type Industrial purify water
consumption ≤400CC/H
Liquid used Air source Compressed air
Pressure range 0.5 -0.6Mpa(While cleaning)
Jet pressure ≤0.4Mpa
Air consumption 280NL/min.or less
Power Voltage AC200-240V
Rated power consumption Max. 200W
Suction nozzle tray Specification Default 24 positions
Object to be cleaned Mounting nozzle  01005-2125
By SMThelp SMT • THT • • • • • • • • • • • • • • • 0 Comments

What is the NEXT of Through Hole Technology in Electronic Manufacturing



We designed and manufactured Auto Insertion machine in Shenzhen China,  -- Decreasing labor cost  -- Easier manufacturing and operations management  -- Predictable Product Quality – Less repairs  -- No wrong parts nor wrong polarity  -- Less risk of damage due to human contact (contamination, ESD, physical damage to components)  -- Better clinching, less risk of solder issues.  -- Smaller factory space required to produce same volume of product

Welcome to visit Through Hole Technology Channel: https://www.youtube.com/channel/UCXvX1BREsZIKMSFBXKVGCCg



							

														

						

					


					
					

						

														

								
								
								
									By 
								
								 Auto insertion								  •  •  •  •  •  •  •  •  • 								0 Comments
							

							
Carrier clips — UIC Spare parts for Auto Insertion Machine

							

								
 



Carrier Clip is the very common wearing parts in Radial insertion machine. We manufacture the high copy spare parts , promise the quality and keep low cost .

							

														

						

					


					
					

						
					


					
					

						

														

								
								
								
									By SMThelp
								
								 Accessary • SMT								  •  •  •  •  •  •  •  •  •  •  •  • 								0 Comments
							

							
Helps the Environment — S1688 stencil cleaner machine

							

								
Waste Streams from Printed Circuit Board Manufacturing

Waste Stream Waste Stream

Waste Source Description Composition

Cleaning/Surface preparation 1. Airborne particulates

2. Acid fumes/organic vapors

3. Spent acid/alkaline solution

4. Spent halogenated solvents

5. Waste rinse water

Catalyst application/

Electroless plating

1. Spent electroless copper bath

2. Spent catalyst solution

3. Spent acid solution

4. Waste rinse water

Pattern printing/masking 1. Spent developing solution

2. Spent resist removal solution

3. Spent acid solution

4. Waste rinse water

Electroplating 1. Spent plating bath

2. Waste rinse water

Etching 1. Spent etchant

2. Waste rinse water

Board materials,

sanding materials,

metals, fluoride,

acids, halogenated

solvents, alkali.

Acids, stannic

oxide, palladium,

complexed metals,

chelating agents.

Vinyl polymers,

chlorinated

hydrocarbons, organic

solvents, alkali.

Copper, nickel, tin,

tin/lead, gold,

fluoride, cyanide, sulfate.

Ammonia, chromium,

copper, iron, acids.


 





 

							

														

						

					


					
					

						

														

								
								
								
									By 
								
								 Accessary • Article • Auto insertion • LED Marketing • SMT								  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •  • 								0 Comments
							

							
Comparison between Pneumatic stencil cleaner and Ultrasonic stencil cleaner

							

								





CLICK HERE TO SEND ME A EMAIL

							

														

						

					


					
					

						

															
																	
														

								
								
								
									By SMThelp
								
								 Auto insertion • SMT • THT								  •  •  •  •  •  •  •  •  •  • 								0 Comments
							

							
One key point to consider Radial machine spare parts design and manufacturing

							

								
Reels or ammo packs of radial leaded components are loaded on the sequencer module, dispensed, and inserted in the PCB following the programmed sequence. Component dispensing heads remove components from the carrier tape and place them in component carrier clips located on the sequencer chain assembly. The sequencer chain assembly transports the components to the insertion area. While the components are on the sequencer chain assembly, the carrier tape is removed. The component transfer assembly transfers components from the sequencer chain assembly into the insertion head tooling. The insertion tooling guides the leads through the holes in the PC board. The cut and clinch unit cuts and then forms the leads, securing the component in the PC board.




							

														

						

					


					
					

						

															
																	
														

								
								
								
									By 
								
								 Article • LED Marketing								  •  •  •  •  •  •  •  •  •  • 								0 Comments
							

							
Do you really know how to build a SMT dust-free workshop in LED solution?

							

								
Before manufacturing led lights, it’s very important to conduct SMT factory planning, especially for any newly-built SMT factory. New factories have little experience in SMT factory design layout and SMT workshop design so there may be some details lost during the set-up phase. After production begins, discovering problems after the fact can cause unnecessary losses. So why not design your SMT factory layout and plan with these potential issues in mind and prepare in advance? Learn SMT clean mounting workshop production requirements in this article.




LED SMT车间


 SMT workshop production requirements:


1. Workshop bearing capacity, vibration, noise requirements:

Factory ground bearing capacity should be greater than 8 kn/m2.

Vibration should be controlled in less than 70 db, the maximum value of no more than 80db.

The noise should be controlled within 70 dba.

2.  Power supply:

General requirements of single-phase AC220 (220 + / – 10%, 0/60 hz), three-phase AC

380 (380 + / – 10%, 50/60 hz), more than double the power consumption of power supply of power than.

3. Air:

According to the requirement of the equipment configuration of air pressure, can use plant air, and  also be configured individually oil-free compressed air machine, general pressure is greater than 7 kg/cm2.

For clean, dry cleaning the air, so the need for compressed air to oil, dust and water treatment.Made from stainless steel or pressure plastic air duct.

4. Exhaust:

Reflow soldering and wave soldering equipment need exhaust fan.For hot blast stove, exhaust pipe of the minimum flow rate value is 500 cubic feet per minute (14.15 m3 / min).

5. Lighting:

In the ideal of the plant Illumination is 800 ~ 1200 lux, at least not less than 300 lux, when low intensity of illumination, in the inspection, repair, measurement work areas should install local lighting.


6. Work environment:

Factory to keep clean, no dust, no corrosivegas.Production workshop should have cleanliness control, control the cleanliness: the class of 500000.

Production workshop environment temperature to 23 + / – 3 ℃ is the best, average of 17 ~ 28℃,relative humidity is 45% ~ 45% RH.





Save