Southern Machinery provides professional SMT peripheral equipment
One fast and safe way cleaning stencil without electricity
Automatic Pheumatic Stencil Cleaner
1, Zero pollutant of SMT stencil cleaning machine, protect our earth.
2, 2 grade filter for SMT stencil cleaning machine cleaning fluid circulation use.
3, 3 minutes to complete a SMT stencil cleaning, improving the quality of your electronic products.
4, Zero power consumption ， to save energy.
5,Environmental protection, please use our full pneumatic SMT stencil cleaning machine.
6, Improve PCBA welding effect, use our full pneumatic SMT stencil cleaning machine.
7, No need electronic power, no fire and detonate caused.
Know more about LED SMT whole line solution
What problem we can help you solve?
- How to build a LED assembly line?
- How to choose a cost-effective LED SMT line?
- What solution can reflect the quickest ROI (Return on Investment)?
- What’s the true one stop solution?
- What is the total cost for building a full LED SMT line?
- In what situation should you choose a semi auto solution?
We welcome any of your inquiries, questions or concerns. Contact us to find out how to greatly save on your manufacturing costs, and increase your benefits.
Why choose “One stop solution “?
Southern Machinery provide the whole line installation ,training and after sales services. Improve efficiency , reduce cost.
The wole SMT line process including: Printer, pick &place ,reflow oven, conveyor.
One stop improve the whole line pruduction capacity , with line balance.
Overall considering to improve product quality , not just by a single machine.
It is the best solution proved by most of our customers.
What on earth decide the price?
Often some customers asked: how do your price so expensive, and others are so cheap, it is shown in figure, the same but vary widely, the era of cheap has ended, and a points the price is a goods, to the low price is not necessarily don’t earn money, also not necessarily price is high profits, because all the products on the market, there are 3,6,9 points, the original cost is the final price guide!
Dispenser for high precision products
Fully automatic dispensing system bench top automatic visual glue dispenser Automatic visual glue dispenser is used to Chevrons, fridge magnets, key chains, power supply, cell phone,energy saving light, LED, DVD, DC, Switch, Connector, relay and other industries needing fluid glue solder.
Feature of Glue dispensing equipment
1 Improve the production efficiency,reduce artifical loss.
2 Equipped with high performance CCD vision positioning system,visual dispensing route,improve accuracy.
3 Use industrial computer to control operating system,
4 According to the different artifacts, choose suitable LED light source for lighting.
5 Adopt servo motor, ball screw drive.
6 It can arbitrary match with needle valve, diaphragm valve,screw valve, pnematic injection valve, piezoelectric injection valve.
SMT Pick And Place machine Spare parts
We can supply smt machine parts, smt spare parts, replacement parts for pick and place machine, Brands including FUJI, SIEMENS, PANASONIC, JUKI, YAMAHA, , etc.
Part of product list:
|
Compatible for |
Part name |
Part No. |
Usage |
|
fuji NXT H01 |
H01 Filter (with plastic BKT) |
AA1FZ01 |
Consumable parts |
|
fuji NXT H12 |
H12 Filter (with plastic BKT) |
AA19H02 |
Consumable parts |
|
fuji NXT H01 |
H01 smt filter |
XH00560 |
Consumable parts |
|
fuji |
smt pin thick pin |
ADCQK8010 |
replacement parts |
|
fuji |
smt pin thin pin |
ADCQK8010 |
replacement parts |
|
fuji XP243 |
XP243 U axis PULLEY |
AGFTR8220 |
replacement parts |
|
fuji XP243 |
XP243 U axis PULLEY |
AGFTR8230 |
replacement parts |
|
fuji |
fuji sliding block and thimble |
O0186 |
replacement parts |
|
fuji CP6 |
CP6 HOLDER |
AWPH3110 |
replacement parts |
|
fuji CP43 |
CP43 CLUTCH |
MPH0501 |
replacement parts |
|
fuji QP242 |
QP242 Filter |
H3022T |
Consumable parts |
|
fuji CP41 |
CP41 press button |
O0191 |
replacement parts |
|
fuji IP3 |
IP3 Filter |
H30215 |
Consumable parts |
|
fuji CP6 |
cylinder |
WPA5150 |
Consumable parts |
|
fuji CP7 CP8 |
smt filter |
DCPH3780 |
Consumable parts |
angela@smthelp.net
angela@smthelp.net
angela@smthelp.net
angela@smthelp.net
angela@smthelpl.com
angela@smthelp.net
angela@smthelp.net
angela@smthelp.net
angela@smthelp.net
angela@smthelp.net
angela@smthelp.net
angela@smthelp.net
angela@smthelp.net
Universal Instruments/Axial Insertion/AI spare parts
41059901 SLEEVE, BEARING 40821301 BUSHING 40520204 GO RINGS 40821201 BUSHING 40520201 GO RINGS
40520203 GO RINGS 40520202 GO RINGS 41499603 ANVIL, VSL 41499703 CUTTER FORMER 41499701 CUTTER FORMER
41499706 CUTTER FORMER 41700801 PIN & CLIP ASSY 41848601 CLAMP,RETAINER 41700803 RP 41700805 PIN 42480201 ESCAPE,RH
42480101 ESCAPE,LH 42804702 CARRIER CLIP ASSY 42804703 CARRIER CLIP ASSY 42718601 CLAMP 42740613 FITTING
42717602 HOUSING 42686801X CARRIER CLIP II ASSY 42509001 ROLLER 42513301 RAMP 43366105 FORMER,LEFT
42502501 SLIDE SLIDE 43366205 FORMER,RIGHT 43366107 FORMER,LEFT STD 43461501 CUT FORM 43366207 FORMER
43461601 CUT FORM 43461801 ANVIL 43470602 HOUSING,CLINCH 43470601 HOUSING,CLINCH 44241906 ARM
44241912 ARM KICKOUT-RH 44241505 FORMER 44241904 ARM KICKOUT STD RH 43871802 CUTTER 44241405 FORMER
43871702 BUSHING 43871701 BUSHING 44242004 ARM,KICKOUT,STD,LH 43556202 CLAMP 44242012 ARM
44242006 ARM 44266704 DRIVER TIP,R 44266703 DRIVER TIP,R 44281702 BUSHING CUTTER,STD 44266803 DRIVER TIP,L
44426606 PUSHER, UPPER 5.0 44426701 PUSHER, LOWER 44896802 SUPPORT,GUIDE 44962901 SHAFT 44629802 CLAMP, JAW
44629902 CLAMP,DUAL JAW 44629702 CLAMP, JAW 44629706 CLAMP 44624302 PLATE, TOP 44629502 GUIDE,DUAL JAW
44624203 STOP 44963001 BEARING 44963002 BEARING 44964701 PISTON, ANVIL 45095202 HOLDER, LATCH
45053801 LATCH 45251701 ANVIL-STD 45218501 SPREADER 45345501 CLEVIS ACTUATOR ASM 45315502 PLUG
45592601 BLADE 45592520 FORMER 45592420 FORMER 45592508 FORMER 45586701 O-RING .489 X .070
45592408 FORMER, 45452001 SPRING, EXTENSION 45575702 CUTTER,ANVIL 45592701 BLADE 45373901 SPRING
45744401 BUSHING,CUTTER 45798406 TUBE 46276401 RATCHET DRIVE DETENT 45988201 INDEX WHEEL 46488901 STOP,ACTUATOR
46287002 FLAG,MOLDED 47062501 RP 47062502 SPRING 46500701 INS HD ASSY 80000109 SHCS 4-40 X 1/8 80000104 SHCS 4-40 X 1/2
80000101 SHCS 4-40 X 3/16 80000102 SHCS 4-40 X 1/4 80000407 SHCS 8-32 X 1 80000302 SHCS 6-32 X 3/8 80003815 SSS 10-32×1/2
80002608 SFHS 10-32×3/8 80000515 SHCS 10-32 X 1/2 80000608 SHCS 1/4-20 X 1-1/4 80002201 SFHS 4-40×1/4 80000518 SHCS 10-32 X 7/8
80000514 SHCS 10-32 X 3/8 80001301 SBHS 4-40×1/4 80009905 SDP 1/8 X 7/8 80010103 SDP 1/4 X 3/4 SDP 80004602 SSS 4-40×3/16
80007204 SSSOP 1/4-20 X 3/4 80011003 SHSS 1/4 X 5/8 80011303SCREW SHSS 1/2×3/4 80010106 SDP 1/4 X 1-1/4 90055225 PUSHER,PULL DOWN
80011205 SHSS 3/8 X 1 80018705 SLW #10 90054811 HOUSING,CLIP 7.5.5.0 80025913 PIN 90050416 ECCENTRIC,INSULATED
HEXNUT-MS 10-32 O-RING .049 X .103 SDP 1/16 X 3/8 O-RING .125 X 070 PISTON & SHAFT UNIT
40152406 STD HD CHAIN ASSY 40152306 LEFT STD CLIP ASSY 40152302 OUTSIDE CLIP ASSY-LH 40152206 RIGHT STD CLIP ASSY
40152304 LEFT STD CLIP ASSY 40152301 OUTSIDE CLIP ASSY
Southern Machinery : To Provide professional solution of SMT/AI & SMT peripheral equipments. We provide totally…
由 Auto Insertion 发布于 2015年12月14日
Frequently Asked S-600-OF Pick & Place Radial Component machine Questions and Answers
What components can the S-600-OF place?
The S-600-OF can place components ranging from 0402-??mm2 .
Radial Leaded components
Package range is
What is the minimum/maximum PCB size?
S-600-OF can populate a 2″x2″ (50mmx50mm)/15″x18″ PCB(381mmx460mm)
Thickness range: 0.5mm-5.0mm
Weight is restricted to 3.3 lbs. maximum (completed PCB)
What is the topside/bottomside PCB clearance?
Maximum component height is o.256″(6.5mm)
Bottomside clearance is 30mm under the PCB
1. What will be assembled?
2. How much of it will be assembled?
3. How fast must it be assembled?
4. What operations must be performed?
5. In what order should those operations be completed?
6. Can the product design be adapted to accommodate automation?
7. Where are the “trouble spots” in how the product was previously assembled?
8. How well do the parts and components meet tolerances?
9. What Quality standards does the part have to meet?
10. Is there enough space for the equipment?
11. What kind of environment will the equipment be in?
12. How much money is available to spend and When?
13. Will workers need to be hired to run and maintain the equipment?
14. Will workers need to be reassigned?
15. Will the machine be located in another country?
